It is very difficult for me to find headbands that stay on my head, hold my hair, and don't give me headaches. I am so demanding! This headband works perfectly. Here is a tutorial for you to make your own.
Supplies
- Two small pieces of coordinating fabric (about 3"x16" each)
- Fusible interfacing
- About 8-10" of elastic (I prefer 3/8" width)
- Thread
Directions
1. Print this pattern
2. Fold the fabric in half, pin the pattern in place, and cut out. Repeat for the coordinating fabric and two times on the fusible interfacing
1. Print this pattern
2. Fold the fabric in half, pin the pattern in place, and cut out. Repeat for the coordinating fabric and two times on the fusible interfacing
3. Be sure to notch the cut out pieces on the place indicated on the pattern
4. Attach the fusible interfacing (mine is in pieces because I was using up scraps...)
5. Place your fabric pieces right sides together and sew from the notch on one end, following the curve of the fabric, until you reach the notch on the other end. Remember to back stitch at the beginning and the end. The pattern allows for a 1/2" seam allowance. Repeat on the other side of the headband.
6. Trim the excess fabric in between the notches.
7. Carefully flip the headband right side out. It is a tight squeeze, but it gets easier once you get it started. Iron.
8. At the ends of the headband, where the two sides did not get sewn together, fold in the sides. Iron.
9. Fold over the ends of the fabric and tuck in. Iron.
9. Insert the elastic into the space between the two sides. Pin in place. Carefully try on the headband to test if the elastic is the proper length. (Try not to stick your ears with the pins in the process.) Adjust the length of the elastic, as needed.
10. Top stitch around the entire head band. At the ends where the elastic is placed, stitch back and forth for extra strength.
And you are done! Wear and love.
